ZPDT RELEASE 1.12 DRIVER 59.14

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.12 DRIVER 59.14

$0.00

ZPDT RELEASE 1.12 DRIVER 59.14

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.12 DRIVER 59.14

OVERVIEW

zPDT Software Update, release date July 1^st, 2024
This Driver release of GA-12 (59.14) includes the following updates:

New Function:

• None

Fixed in this release:

• Deflate / Inflate fixes.
• Fix for eDMosa core.
• Fix for OSA in controller mode.
• Update for DASD CU authorization. Condition has been resolved and messages on zOS startup will no longer occur.
• Added missing enhanced core script.
• Added label option to request_license command to allow user to prefix the file name.

INSTALLATION

If installed on a clean machine (with no Safenet rpms previously installed or Safenet rpms removed and then machine rebooted), users will be able to obtain licenses right after installation. If installed on a machine that has a previous z1090 installed, A machine reboot will be required after the installation. Once machine is back up, users will be able to obtain licenses. Failure to reboot will prevent obtaining licensing with a return code of 304 – “license not available”

This release will install over any exiting zpdt driver already installed. And any other driver will install over this release. But if you re-install an older release, the Safenet rpms will go back to the bad versions and you will not obtain licenses. For downloaded zip file:

• Unzip the downloaded release file
• Review the Readme file (.html & .pdf) for full information and instructions
• FTP or otherwise transfer the install file (z1090-1-12.59.14.x86_64 in the /linux directory) to your zPDT
  system in the /tmp directory
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-12.59.14.x86_64
• Execute the z1090 installer program: ./z1090-1-12.59.14.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then
  complete

For CDROM or .iso distributions:

• Burn the .iso image onto a CD as an “image”. The resulting CD should have multiple files and directories on it.
• See the instructions in the CD Readme file (.html and .pdf) on the CD for full information
• Copy the z1090 file to your /tmp directory:

cp /run/media/ibmsys1/zPDT_59.14/linux/z1090* /tmp (1 See note below regarding path to the CD)

• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-12.59.14.x86_64
• Execute the z1090 installer program:   ./z1090-1-12.59.14.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete.

1 Different releases of Linux may automatically mount the CD at a different mount point than shown here. You may have to determine the correct path to the install file.

If you applied any IBM supplied zPDT patches to your installed system you will need to remove them before you can install this new release. Check the documentation that came with the patches for specific removal instructions.

You should test your system to verify that it is functioning properly. The zPDT release level is displayed as one of the messages early in the initialization process. It should report release 59.14.

Review the External Release Letter carefully; there are significant changes.

There are also release specific installation instructions in the External Release Letter and general installation instructions in Chapter 5 of the zPDT Guide and Reference Redbook, (SG248206) version 6.

zPDT Release 1.12 Driver 59.14.iso

zPDT Release 1.12 Driver 59.14.zip

ZPDT RELEASE 1.12 DRIVER 59.09

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.12 DRIVER 59.09

$0.00

ZPDT RELEASE 1.12 DRIVER 59.09

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1. 12 Driver 59.09

OVERVIEW

zPDT Software Update, release date March 8^th, 2024
This Driver release of GA-12 (59.09) includes the following updates:

New Function:

• Support for New hardware token
  Support was provided in GA11 FixPack 2 . But the new tokens have not shipped yet. Please see the Addendum below for more information for when the new tokens are provided.

Fixed in this release:

• Added missing script to check and select type of core collected. See RedBook for more information
• Resolved dfltcc rare issue ipl’ing Linux on Z under 2nd level zVM  (zVM on zVM)
• Fixed delay freeing Gen2 (LDK) licenses on zPDT termination
• Fixed core dump when awsrdr has been passed an invalid file / card deck name
• Fixed problem defining 2048 devices in the devmap

INSTALLATION

If installed on a clean machine (with no Safenet rpms previously installed or Safenet rpms removed and then machine rebooted), users will be able to obtain licenses right after installation. If installed on a machine that has a previous z1090 installed, A machine reboot will be required after the installation. Once machine is back up, users will be able to obtain licenses. Failure to reboot will prevent obtaining licensing with a return code of 304 – “license not available”

This release will install over any exiting zpdt driver already installed. And any other driver will install over this release. But if you re-install an older release, the Safenet rpms will go back to the bad versions and you will not obtain licenses. For downloaded zip file:

• Unzip the downloaded release file
• Review the Readme file (.html & .pdf) for full information and instructions
• FTP or otherwise transfer the install file (z1090-1-12.59.09.x86_64 in the /linux directory) to your zPDT system in the /tmp directory
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-12.59.09.x86_64
• Execute the z1090 installer program: ./z1090-1-12.59.09.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete

For CDROM or .iso distributions:

• Burn the .iso image onto a CD as an “image”. The resulting CD should have multiple files and directories on it
• See the instructions in the CD Readme file (.html and .pdf) on the CD for full information
• Copy the z1090 file to your /tmp directory:
  cp /run/media/ibmsys1/zPDT_59.09/linux/z1090* /tmp (1 See note below regarding path to the CD)
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-12.59.09.x86_64
• Execute the z1090 installer program:   ./z1090-1-12.59.09.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete

1 Different releases of Linux may automatically mount the CD at a different mount point than shown here. You may have to determine the correct path to the install file.

If you applied any IBM supplied zPDT patches to your installed system you will need to remove them before you can install this new release. Check the documentation that came with the patches for specific removal instructions.

You should test your system to verify that it is functioning properly. The zPDT release level is displayed as one of the messages early in the initialization process. It should report release 59.09.

Review the External Release Letter carefully; there are significant changes.

There are also release specific installation instructions in the External Release Letter and general installation instructions in Chapter 5 of the zPDT Guide and Reference Redbook, (SG248206) version 6.

zPDT Release 1.12 Driver 59.09.iso

zPDT Release 1.12 Driver 59.09.zip

ZPDT RELEASE 1.12 DRIVER 59.07

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.12 DRIVER 59.07

$0.00

ZPDT RELEASE 1.12 DRIVER 59.07

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1. 12 Driver 59.07

OVERVIEW

zPDT Software Update, release date January 11, 2024
This Driver release of GA-12 (59.07) includes the following updates:

New Function:

• Completely new JIT code
  JIT now incorporates the open-source Eclipse OMR technology as the basis for the JIT compiler.
• Added Capstone Disassembler to improve debug capabilities.
  manop command – disasm <addr>
• zPDT core Dump Enhancement
  The key element is the inclusion of many (or all) of the Linux library files that are relevant to the failing program.
• Support for New hardware token
  Support was provided in GA11 FixPack 2 . But the new tokens have not shipped yet. Please see the Addendum below for more information for when the new tokens are provided.

Fixed in this release:

• The timeouts associated with the awsstop command have been slightly lengthened to avoid unexpected messages while ending zPDT operation.(was also provided in GA11 FixPack 2)
• Add Leap second switch in devmap
  Please read the Addendum, section  “LEAP SECONDS”,  in this document. (was also provided in GA11 FixPack 2)
• Crypto Express 8s level, CCA version 8.1.71i. This provides some minor internal fixes.
  (was also provided in GA11 FixPack 2)
• z1090instcheck reports problems on Fedora 38 / 39 and added support new core pattern enhancement.

INSTALLATION

If installed on a clean machine (with no Safenet rpms previously installed or Safenet rpms removed and then machine rebooted), users will be able to obtain licenses right after installation. If installed on a machine that has a previous z1090 installed, A machine reboot will be required after the installation. Once machine is back up, users will be able to obtain licenses. Failure to reboot will prevent obtaining licensing with a return code of 304 – “license not available”

This release will install over any exiting zpdt driver already installed. And any other driver will install over this release. But if you re-install an older release, the Safenet rpms will go back to the bad versions and you will not obtain licenses. For downloaded zip file:

• Unzip the downloaded release file
• Review the Readme file (.html & .pdf) for full information and instructions
• FTP or otherwise transfer the install file (z1090-1-12.59.07.x86_64 in the /linux directory) to your zPDT system in the /tmp directory
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-12.59.07.x86_64
• Execute the z1090 installer program: ./z1090-1-12.59.07.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete

For CDROM or .iso distributions:

• Burn the .iso image onto a CD as an “image”. The resulting CD should have multiple files and directories on it.
• See the instructions in the CD Readme file (.html and .pdf) on the CD for full information
• Copy the z1090 file to your /tmp directory:
  cp /run/media/ibmsys1/zPDT_59.07/linux/z1090* /tmp (1 See note below regarding path to the CD)
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-12.59.07.x86_64
• Execute the z1090 installer program:   ./z1090-1-12.59.07.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete.

1 Different releases of Linux may automatically mount the CD at a different mount point than shown here. You may have to determine the correct path to the install file.

If you applied any IBM supplied zPDT patches to your installed system you will need to remove them before you can install this new release. Check the documentation that came with the patches for specific removal instructions.

You should test your system to verify that it is functioning properly. The zPDT release level is displayed as one of the messages early in the initialization process. It should report release 57.16.

Review the External Release Letter carefully; there are significant changes.

There are also release specific installation instructions in the External Release Letter and general installation instructions in Chapter 5 of the zPDT Guide and Reference Redbook, (SG248206) version 6.

zPDT Release 1.12 Driver 59.07.iso

zPDT Release 1.12 Driver 59.07.zip

ZPDT RELEASE 1.11 DRIVER 57.16

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.11 DRIVER 57.16

$0.00

ZPDT RELEASE 1.11 DRIVER 57.16

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.11 Driver 57.16

OVERVIEW

zPDT Software Update, release date October 3^rd, 2023
This Driver release of GA-11 (57.16) includes the following updates:

New Function:

• Introducing the support for the new Gen2 1090 hardware token.

Fixed in this release:

• The timeouts associated with the awsstop command have been slightly lengthened to avoid unexpected messages while ending zPDT operation.
• Add Leap second switch in devmap
  Please read the Addendum, section “LEAP SECONDS”, in this document.
• Crypto Express 8s level, CCA version 8.1.71i . This provides some minor internal fixes.

Emulation of System z Networking (OSA) no longer requires root authority as it is now handled by Linux Capabilities. Linux installs this by default on Redhat and Ubuntu but is not on Suse. There you will need to install the support via “sudo zypper install libcap-progs”. You will need to reinstall the driver to make this effective via “z1090-1-11.57.16.x86_64 –refresh”

Previous release of GA-11 (57.10) included the following updates:

• DEFLATE is active in this release!
• Fixed an obscure convert Unicode instruction problem.
• New ap_acptool command that works with the emulated cryptographic adapter and will eventually replace the current acptool command, introduced in base GA11 release. See the command manpage for more information.
• Token Licensing zip file validation prior to unzipping

INSTALLATION

If installed on a clean machine (with no Safenet rpms previously installed or Safenet rpms removed and then machine rebooted), users will be able to obtain licenses right after installation. If installed on a machine that has a previous z1090 installed, A machine reboot will be required after the installation. Once machine is back up, users will be able to obtain licenses. Failure to reboot will prevent obtaining licensing with a return code of 304 – “license not available”

This release will install over any exiting zpdt driver already installed. And any other driver will install over this release. But if you re-install an older release, the Safenet rpms will go back to the bad versions and you will not obtain licenses. For downloaded zip file:

• Unzip the downloaded release file
• Review the Readme file (.html & .pdf) for full information and instructions
• FTP or otherwise transfer the install file (z1090-1-11.57.16.x86_64 in the /linux directory) to your zPDT system in the /tmp directory
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-11.57.16.x86_64
• Execute the z1090 installer program: ./z1090-1-11.57.16.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete

For CDROM or .iso distributions:

• Burn the .iso image onto a CD as an “image”. The resulting CD should have multiple files and directories on it.
• See the instructions in the CD Readme file (.html and .pdf) on the CD for full information
• Copy the z1090 file to your /tmp directory:
  cp /run/media/ibmsys1/zPDT_55.16/linux/z1090* /tmp (1 See note below regarding path to the CD)
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-11.57.16.x86_64
• Execute the z1090 installer program:   ./z1090-1-11.57.16.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete.

1 Different releases of Linux may automatically mount the CD at a different mount point than shown here. You may have to determine the correct path to the install file.

If you applied any IBM supplied zPDT patches to your installed system you will need to remove them before you can install this new release. Check the documentation that came with the patches for specific removal instructions.

You should test your system to verify that it is functioning properly. The zPDT release level is displayed as one of the messages early in the initialization process. It should report release 57.16.

Review the External Release Letter carefully; there are significant changes.

There are also release specific installation instructions in the External Release Letter and general installation instructions in Chapter 5 of the zPDT Guide and Reference Redbook, (SG248206) version 6.

zPDT Release 1.11 Driver 57.16.iso

zPDT Release 1.11 Driver 57.16.zip

ZPDT RELEASE 1. 10 Driver 57.10

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1. 11 Driver 57.10

$0.00

OVERVIEW

zPDT Software Update, release date November 8th, 2022
This Driver release of GA-11 (57.10) includes the following updates:

New Functions:

• DEFLATE is active in this release!

Fixed in this release:

• Fixed an obscure convert Unicode instruction problem.
• New ap_acptool command that works with the emulated cryptographic adapter and will eventually replace the current acptool command, introduced in base GA11 release. See the command manpage for more information.
• Token Licensing zip file validation prior to unzipping.

Emulation of System z Networking (OSA) no longer requires root authority as it is now handled by Linux Capabilities. Linux installs this by default on Redhat and Ubuntu but is not on Suse. There you will need to install the support via “sudo zypper install libcap-progs”. You will need to reinstall the driver to make this effective via “z1090-1-11.57.10.x86_64 –refresh”

Previous release of GA-11 (57.06) included the following updates:

• MSA9 support.
• DEFLATE is included but is off by default. We are investigating a late breaking known issue with zOSMF.  For now you may toggle it on/off with the zPDT command: dflt . We expect this to be resolved in a future FixPack.
• Devmap definitions for zEDC adapters are no longer supported and are ignored.
• z16 Architecture support:
  CFCC Prod Rel 25.00 Service Level 02.43
  Crypto Express 8s level, CCA version 8.0.63i , from previous level CCA version 7.1.23i
  The format of the master keys differs from earlier versions and zPDT does not automatically convert the older form to the newer form. You must initialize the new crypto adapter level with the same master keys previously used if you need to access previously encrypted data.
  In the srdis directory, a new directory name is created for each adapter defined in the devmap (any prior level directories are untouched).
  Highlighting Neural Network Processing Assist Facility.
• New command line tool : acptool   –  used to enable/disable/query Crypto CCA ACP’s for zPDT.
• Fix for listVtoc for ckd disks that have a very large number of files.

INSTALLATION

If installed on a clean machine (with no Safenet rpms previously installed or Safenet rpms removed and then machine rebooted), users will be able to obtain licenses right after installation. If installed on a machine that has a previous z1090 installed, A machine reboot will be required after the installation. Once machine is back up, users will be able to obtain licenses. Failure to reboot will prevent obtaining licensing with a return code of 304 – “license not available”

This release will install over any exiting zpdt driver already installed. And any other driver will install over this release. But if you re-install an older release, the Safenet rpms will go back to the bad versions and you will not obtain licenses. For downloaded zip file:

• Unzip the downloaded release file
• Review the Readme file (.html & .pdf) for full information and instructions
• FTP or otherwise transfer the install file (z1090-1-11.57.10.x86_64 in the /linux directory) to your zPDT
  system in the /tmp directory
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-11.57.10.x86_64
• Execute the z1090 installer program: ./z1090-1-11.57.10.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then
  complete

For CDROM or .iso distributions:

• Burn the .iso image onto a CD as an “image”. The resulting CD should have multiple files and directories on it.
• See the instructions in the CD Readme file (.html and .pdf) on the CD for full information
• Copy the z1090 file to your /tmp directory:

cp /run/media/ibmsys1/zPDT_57.10/linux/z1090* /tmp (1 See note below regarding path to the CD)

• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-11.57.10.x86_64
• Execute the z1090 installer program:   ./z1090-1-11.57.10.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete.

1 Different releases of Linux may automatically mount the CD at a different mount point than shown here. You may have to determine the correct path to the install file.

If you applied any IBM supplied zPDT patches to your installed system you will need to remove them before you can install this new release. Check the documentation that came with the patches for specific removal instructions.

You should test your system to verify that it is functioning properly. The zPDT release level is displayed as one of the messages early in the initialization process. It should report release 57.10.

Review the External Release Letter carefully; there are significant changes.

There are also release specific installation instructions in the External Release Letter and general installation instructions in Chapter 5 of the zPDT Guide and Reference Redbook, (SG248205) version 5.

zPDT Release 1.11 Driver 57.10.iso

zPDT Release 1.11 Driver 57.10.zip

ZPDT FIXPACK RELEASE 1.10 DRIVER 55.16

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.10 Driver 55.16

$0.00

ZPDT FIXPACK RELEASE 1.10 DRIVER 55.16

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1.10 Driver 55.16

OVERVIEW

zPDT Software Update, release date October 3^rd, 2023
This Driver release of GA-10 (55.16) includes the following updates:

New Function:

• Introducing the support for the new Gen2 1090 hardware token.

Fixed in this release:

• Fix for listVtoc for ckd disks that have a very large number of files.
• Fix data truncation when using iconv

Emulation of System z Networking (OSA) no longer requires root authority as it is now handled by Linux Capabilities. Linux installs this by default on Redhat and Ubuntu but is not on Suse. There you will need to install the support via “sudo zypper install libcap-progs”. You will need to reinstall the driver to make this effective via “z1090-1-11.57.10.x86_64 –refresh”

Previous release of GA-10 (55.16) included the following updates:

• Enhancement to allow defining z memory in the devmap with Gb.
• Fixed problem when both 3270port and intASCIIport are defined to the devmap.
• Fixed ipl_dvd failure when ap crypto is defined.990797: CMPSC expansion with entropy failure.
• Fixed CMPSC expansion with entropy failure.
• awschmap now provides return code of 4 if there are any warnings.

INSTALLATION

If installed on a clean machine (with no Safenet rpms previously installed or Safenet rpms removed and then machine rebooted), users will be able to obtain licenses right after installation. If installed on a machine that has a previous z1090 installed, A machine reboot will be required after the installation. Once machine is back up, users will be able to obtain licenses. Failure to reboot will prevent obtaining licensing with a return code of 304 – “license not available”

This release will install over any exiting zpdt driver already installed. And any other driver will install over this release. But if you re-install an older release, the Safenet rpms will go back to the bad versions and you will not obtain licenses. For downloaded zip file:

Unzip the downloaded release file

• Review the Readme file (.html & .pdf) for full information and instructions
• FTP or otherwise transfer the install file (z1090-1-10.55.16.x86_64 in the /linux directory) to your zPDT
  system in the /tmp directory
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-10.55.16.x86_64
• Execute the z1090 installer program: ./z1090-1-10.55.16.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then
  complete

For CDROM or .iso distributions:

Burn the .iso image onto a CD as an “image”. The resulting CD should have multiple files and directories on it.

• See the instructions in the CD Readme file (.html and .pdf) on the CD for full information
• Copy the z1090 file to your /tmp directory:
  cp /run/media/ibmsys1/zPDT_55.16/linux/z1090* /tmp (1 See note below regarding path to the CD)
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-10.55.16.x86_64
• Execute the z1090 installer program:   ./z1090-1-10.55.16.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete.

1 Different releases of Linux may automatically mount the CD at a different mount point than shown here. You may have to determine the correct path to the install file.

If you applied any IBM supplied zPDT patches to your installed system you will need to remove them before you can install this new release. Check the documentation that came with the patches for specific removal instructions.

You should test your system to verify that it is functioning properly. The zPDT release level is displayed as one of the messages early in the initialization process. It should report release 55.16.

Review the External Release Letter carefully; there are significant changes.

There are also release specific installation instructions in the External Release Letter and general installation instructions in Chapter 6 of the zPDT Guide and Reference Redbook, (SG2482) version 6.

zPDT Release 1.10 Driver 55.16.iso

zPDT Release 1.10 Driver 55.16.zip

ZPDT RELEASE 1. 10 Driver 55.13

Home / Downloads / IBM zPDT Software Updates / ZPDT RELEASE 1. 10 Driver 55.13

$0.00

OVERVIEW

zPDT Software Update, release date February 24^th, 2022
This Driver release of GA-10 (55.13) includes the following updates:

Fixed in this release:

• Fixed problem when both 3270port and intASCIIport are defined to the devmap.
• Fixed ipl_dvd failure when ap crypto is defined.990797: CMPSC expansion with entropy failure.
• Fixed CMPSC expansion with entropy failure.
• awschmap now provides return code of 4 if there are any warnings.

Emulation of System z Networking (OSA) no longer requires root authority as it is now handled by Linux Capabilities. Linux installs this by default on Redhat and Ubuntu but is not on Suse. There you will need to install the support via “sudo zypper install libcap-progs”. You will need to reinstall the driver to make this effective via “z1090-1-10.55.13.x86_64 –refresh”

Previous release of GA-10 (55.10) included the following updates:

• Enhancement to allow defining z memory in the devmap with Gb.
• Fixed an unexpected Specification Exception condition for Compression Call instruction (CMPSC).
• Fixed z1090instcheck on Ubuntu 20.04.
• For IBM zDT : Enhanced Software License Server configuration process to support more rules and enhanced error message.
• 10.55.08.02.x86_64 –refresh”

INSTALLATION

If installed on a clean machine (with no Safenet rpms previously installed or Safenet rpms removed and then machine rebooted), users will be able to obtain licenses right after installation. If installed on a machine that has a previous z1090 installed, A machine reboot will be required after the installation. Once machine is back up, users will be able to obtain licenses. Failure to reboot will prevent obtaining licensing with a return code of 304 – “license not available”

This release will install over any exiting zpdt driver already installed. And any other driver will install over this release. But if you re-install an older release, the Safenet rpms will go back to the bad versions and you will not obtain licenses. For downloaded zip file:

• Unzip the downloaded release file
• Review the Readme file (.html & .pdf) for full information and instructions
• FTP or otherwise transfer the install file (z1090-1-10.55.13.x86_64 in the /linux directory) to your zPDT
  system in the /tmp directory
• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-10.55.13.x86_64
• Execute the z1090 installer program: ./z1090-1-10.55.13.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then
  complete

For CDROM or .iso distributions:

• Burn the .iso image onto a CD as an “image”. The resulting CD should have multiple files and directories on it.
• See the instructions in the CD Readme file (.html and .pdf) on the CD for full information
• Copy the z1090 file to your /tmp directory:

cp /run/media/ibmsys1/zPDT_55.13/linux/z1090* /tmp (1 See note below regarding path to the CD)

• Switch to root (UID 0) mode: su –
• Change to the /tmp directory: cd /tmp
• Make the program file executable: chmod 775 z1090-1-10.55.13.x86_64
• Execute the z1090 installer program:   ./z1090-1-10.55.13.x86_64 –refreshall
• You will have to scroll through the license agreement then accept it. The installation should then complete.

1 Different releases of Linux may automatically mount the CD at a different mount point than shown here. You may have to determine the correct path to the install file.

If you applied any IBM supplied zPDT patches to your installed system you will need to remove them before you can install this new release. Check the documentation that came with the patches for specific removal instructions.

You should test your system to verify that it is functioning properly. The zPDT release level is displayed as one of the messages early in the initialization process. It should report release 55.13.

Review the External Release Letter carefully; there are significant changes.

There are also release specific installation instructions in the External Release Letter and general installation instructions in Chapter 5 of the zPDT Guide and Reference Redbook, (SG248205) version 5.

zPDT Release 1.10 Driver 55.13.iso

zPDT Release 1.10 Driver 55.13.zip